SE5001A

SE5001A

SE5001A

1-Port Industrial EMC Serial Device Server, with optional 15kV isolation

  • Industrial EMC protection
  • Rugged metal case with wall or DIN-Rail mount
  • 10/100Mbps Fast Ethernet full duplex auto negotiation
  • TCP Server/Client, UDP, Virtual COM and Tunneling
    modes supported
  • Remotely monitor, manage, and control industrial field
    devices
  • Configuration via Web Browser / Serial Console / Telnet
    Console / Windows Utility
  • Remote firmware upgrade


Make Serial Devices Ready to the Network 

The Industrial Serial Server SE5001A is a cost effective gateway for Ethernet (TCP/IP) and serial signal communications; allowing almost any serial device to be connected to a new or existing Ethernet network. 

By encapsulating serial data and transporting it over Ethernet, SE5001A offers full-duplex and bi-directional data seamlessly between the serial port and the Ethernet network. 


Easy to Use 

Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web Browser, Serial Console, or our Windows Utility. Packed in a rugged metal housing for wall or DIN-Rail mount with 9~48VDC wide range power input, SE5001A is ideal for almost any industrial and manufacturing automation process. 

Atop Virtual COM software provides a virtual environment for applications when accessing SE5001A through TCP. 


Specially Designed for Automation Fields 

In industrial and manufacturing automation fields, SE5001A is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems. 

Contact Us for Pricing
Ethernet
ConnectorRJ-45
ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
Port(s)1
Transmission Rate10/100 Mbps
Auto MDI/MDI-XNo
Serial
ConnectorDB9 (SE5001A)
3.81mm 5-pin Terminal Block (SE5001A-TB)
ModeRS-232/ 422/ 485
IsolationNo
Port(s)1
Baud rate1200bps~230kbps
ParityNone, Odd, Even, Mark, Space
Data bits7,8
Stop Bit1,2
Flow ControlNone, Xon/Xoff, RTS/CTS
Power
Connector5.08mm 3-pin Lockable Terminal Block
Input Voltage9-48 VDC
Input Current0.30A
Power Consumption2.7W max.
Reverse Polarity ProtectionYes
RedundancyNo
Approval
EMCFCC Class A, CE Class A
EMSESD Level 4, RS Level 3, EFT Level 3, Surge Level 3, CS Level 3, PFMF Level 3, DIP.
SafetyEN 60950-1
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6
ProtectionIP50 only SE5001A
Environment
Operating0°C~60°C (32°~140°F)
Storage-40°~85°C (-40°~185°F)
Humidity5~95%RH(Non-condensing)
Mechanical
(W x H x D)75mm x 85mm x 28mm
MaterialMetal
InstallationDIN Rail, Wall mount (optional)
Reset ButtonYes
Weight250g
Software
ConfigurationSerial Manager / Web UI / Telnet
Virtual COMWindows / Linux driver
Supported ProtocolIPv4, ICMP, TCP, UDP, DHCP Client, SNMP, HTTP, Telnet, RFC2217
Link Mode
TCP Server4 Connections, Virtual COM, Reverse Telnet
TCP ClientSingle Destinations or Virtual COM
UDP4 Ranges of IPs
Warranty5 years
Model NameP/NDescription
SE5001A S.S.1P1SE5001A0001G1-port Industrial Serial Device Server, D-Sub
Model NameP/NDescription
Power Adapter 
US315-12 (US-Y)
50500151120009GY-Type (BT1-10V) power adaptor,100-240VAC input, 1.25A @ 12VDC output, US plug
Power Adapter
USE315-12 (EU-Y)
50500151120019GY-Type (BT1-10V) power adaptor,100-240VAC input, 1.25A @ 12VDC output, EU plug
ADP-DB9(F)-TB559906231GFemale DB9 to Female 3.81mm TB5 Converter
DK-2530200000000022GDIN Rail Kit

Utility

VersionNameSize
V1.1 Virtual COM driver for Windows v 6.99MB
V1.1 Virtual COM driver for Linux version 2.31MB

Products Brochure

VersionNameSize
SE5001A 0.77MB

Manual

VersionNameSize
SE5001A User manual 1.21MB

Quick Start Guide

VersionNameSize
V1.1 SE5001A Hardware Installation Guide 0.3MB

Firmware

VersionNameSize
SE5001A_AP3600 0.17MB

3 other products in the same category: