Product Description
The PG5916A Series is a highly reliable and fault tolerant Industrial Protocol Gateway. Its powerful architecture provides seamless conversion between the different protocols Ethernet or Serial based. The serial devices communicating on different protocols could be integrated into the system and extend its reach over the gateway’s redundant Ethernet. This device is designed to work in most demanding industries such as power substations, power generation, oil and gas, farming and manufacturing.
The configuration carried out through a user friendly, Java- Based Windows Utility called eNode Designer. It allows configuring target platforms, set device properties and protocol data point mapping. To do so, a project file representing the system should be created. This will include devices and the protocol applications running on them. The configuration is completely dependent on the “eNode Module” which represents that device or application – but may include things such as changing the communication port settings and defining where data point information enters and leaves the eNode Designer system.
PG5916A Series embeds an additional layer of security, allowing the devices to be deployed in topologies that request data to flow through the Internet and preventing sensitive control and monitoring data to be readable from malicious activities. IPsec VPN encryption, configurable in both peer-to-peer and peer-to-side modes will make sure the data passing is encrypted through a strong 128, 192 or 256-bit AES encryption. OpenVPN-based applications can take advantage of Client/Server support on our device.
An additional highlight of ATOP protocol gateways is the ability to enable multiple protocols simultaneously. In contrast to conventional gateways, which require predefinition of a single master and slave protocol each, the Full-License model* allows users to transform multiple incoming protocols in our protocol base to others compatible with the output side, achieving powerful protocol conversion functions, flexible operations, and easier maintenance.
*Coming soon
Application
The protocol gateway’s embedded protocol stacks allow
- Seamless conversion
- Exception/error Management
- Unsolicited event management for the protocols requiring them (such as DNP3)
- High performance
- Low cost
The example shows how to Easily connect a Modbus Serial HMI, through ATOP’s Protocol Gateway to a DNP3.0 Ethernet Server IED. The host HMI has the role of a Modbus Serial Master while the end-device to be accessed is a DNP3.0 Ethernet Server.
ATOP’s protocol Gateway acts towards the HMI seamlessly as a Modbus Serial Slave, answering the poll commands or the write commands required by the Host by its virtual Modbus ID. Meanwhile, it acts as a DNP3.0 Ethernet Client with regard to the end-device whose DNP3.0 address is mapped to the virtual Modbus ID that the HMI is accessing.
Be careful! – all gateway functions listed in the datasheet refer to the “Gateway” role, and not which “host” or “slave” the gate way is connected to. In this example, the SKU shown is “MBSS-DNEC” (Modbus Serial Slave to DNP3.0 Ethernet Client)
Environmental Limits | |
---|---|
Operating Temperature | -40°C~80°C (-40°F~176°F) |
Storage Temperature | -40°C~85°C (-40°F~185°F) |
Ambient Relative Humidity | 5%~95%, 55°C (Non-condensing) |
Physical Characteristics | Value |
---|---|
Housing | IP30 SPCC housing |
Dimension (W x H x D) | 440.6 x 44 x 309 mm (1U Rack-mount) |
Weight | 4,000g |
Installation | 19’’ Rack-Mount (Kit included) |
Reset Button | Yes |
Power | Value |
---|---|
Rated Supply Voltage | Redundant 24-48 VDC or Redundant 100-240 VAC/ 100-370 VDC (HV Series) |
Input Voltage Range | Redundant 19.2-52.8 VDC or Redundant 85-264 VAC/ 100-370 VDC (HV Series) |
Input Current | 0.73 A @ 24 VDC 0.35 A @ 100 VAC 0.20 A @ 100 VDC |
Power Consumption | Approximately 20 W (Max) |
Connector | 10-Pin Terminal Block |
Power Redundancy | Yes |
Reverse Polarity Protection | Yes |
Software | |
---|---|
Protocols | IPv4, ARP, ICMP, TCP, UDP, DHCP Client, DNS Client, Telnet, HTTP, HTTPS, SMTP/TLS, SNMP v1/v2c/v3, Syslog, 802.1D-2004 RSTP, OpenVPN or IPsec VPN (peer-to-peer or peer-to-side), with a maximum VPN throughput of 37.9Mbps(*), and PPTP |
Configuration | Atop Management Utility, Web UI, Telnet, Serial Console, ATOP eNode Designer |
Protocol setting | eNode designer |
Supported Protocols | Modbus TCP/RTU/ASCII, DNP3.0 over serial and TCP/IP, IEC61850, IEC60870-5-101, IEC60870-5-103, IEC60870-5-104 |
Protocol specifications | Refer to datasheet |
Serial Interface | |
---|---|
Connector | D-Sub9 (DB models, supporting only 5-pin RS-232 mode) or 5.08mm 5-Pin Terminal block (TB Models) |
Ports | 16 |
Mode | RS-232/422/485 Software selectable |
Serial Isolation | 3 kV (Sis versions only) |
Baud Rate | 1,200 ~ 921,600 bps software selectable |
Data Bits | 5, 6, 7, 8 software selectable |
Stop Bits | 1, 2 software selectable |
Flow Control | None, Xon/Xoff, RTS/CTS |
Network Interface | |
---|---|
Speed | IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X) - RJ45 version IEEE 802.3u 100Base-FX - SFP version |
Network mode | Independent IP address (6 ports) or Independent IP address (4 ports) + Unmanaged Switch (3 ports, including LAN4) |
Connector ports | RJ45 x 6 (RJ45 version) SFP x 6 (SFP version) |
Certification | Standard |
---|---|
Shock | MIL-STD-810F Method 516.5 |
Drop (Freefall) | MIL-STD-810F Method 516.5 |
Vibration | MIL-STD-810F Method 514.5 C1 & C2 |
RoHS | Yes |
MTBF | PG5900A: 16.60 years PG5916A-6SFP-Sis-HV: 9.18 years PG5916A-6SFP-Sis: 8.63 years |
Warranty | SE5916A-6SFP-Sis-HV: 9.18 years SE5916A-6SFP-Sis: 8.63 years PG5900A / PG5908A / PG5916A: 5 years |
Standard | Item | Test | Value | Level |
---|---|---|---|---|
IEC 61000-4-2 | ESD | Contact Discharge | ±8kV | 4 |
IEC 61000-4-2 | ESD | Air Discharge | ±15kV | 4 |
IEC 61000-4-3 | RS | Radiated (enclosure) | 20 V/m | 3 |
IEC 61000-4-4 | EFT | AC Power Port | ±4.0kV | 4 |
IEC 61000-4-4 | EFT | DC Power Port | ±4.0kV | 4 |
IEC 61000-4-4 | EFT | Signal Port | ±4.0KV | 4 |
IEC 61000-4-5 | Surge | AC Power Port (L-2-L) | Line-to Line±2.0KV | 4 |
IEC 61000-4-5 | Surge | AC Power Port (L-2-E) | Line-to Earth±4.0KV | 4 |
IEC 61000-4-5 | Surge | DC Power Port (L-2-L) | Line-to Line±1.0KV | 3 |
IEC 61000-4-5 | Surge | DC Power Port (L-2-E) | Line-to Earth±2.0KV | 3 |
IEC 61000-4-5 | Surge | Signal Port (L-2-E) | Line-to Earth±4.0KV | 4 |
IEC 61000-4-6 | CS | AC Power Port | 10 V rms | 3 |
IEC 61000-4-6 | CS | DC Power Port | 10 V rms | 3 |
IEC 61000-4-6 | CS | Signal Port | 10 V rms | 3 |
IEC 61000-4-8 | PFMF | Enclosure | 100 A/m 1000 A/m (1sec.) | 5 6 |
IEC 61000-4-11 | DIP | AC Power Port | 30% reduction (Voltage Dips), 1 period 60% reduction (Voltage Dips), 50 period 100%, reduction (Voltage interruptions), 5 period 100% reduction (Voltage interruptions), 50 period | - |
Certification | Standard |
---|---|
Safety | EN61010-1, EN 61010-2-201 |
EMC | FCC Part 15, Subpart B, Class A, EN 55032, Class A, EN 61000-6-2, EN 61000-3-2, EN 61000- 3-3, EN 55024, EN 61000-6-4, IEC 61850-3 / IEEE 1613 |
Protocols | |
---|---|
01SS-03SM | IEC 60870-5-101 Serial Slave to IEC 60870-5-103 Serial Master |
01SS-04EC | IEC 60870-5-101 Serial Slave to IEC 60870-5-104 Ethernet Client |
01SS-50EC | IEC 60870-5-101 Serial Slave to IEC 61850 Client |
01SS-DNEC | IEC 60870-5-101 Serial Slave to DNP3 Ethernet Client |
01SS-DNSM | IEC 60870-5-101 Serial Slave to DNP3 Serial Master |
01SS-MBEC | IEC 60870-5-101 Serial Slave to Modbus Ethernet Client |
01SS-MBSM | IEC 60870-5-101 Serial Slave to Modbus Serial Master |
04ES-01SM | IEC 60870-5-104 Ethernet Server to IEC 60870-5-101 Serial Master |
04ES-03SM | IEC 60870-5-104 Ethernet Server to IEC 60870-5-103 Serial Master |
04ES-50EC | IEC 60870-5-104 Ethernet Server to IEC 61850 Ethernet Client |
04ES-DNEC | IEC 60870-5-104 Ethernet Server to DNP3 Ethernet Client |
04ES-DNSM | IEC 60870-5-104 Ethernet Server to DNP3 Serial Master |
04ES-MBEC | IEC 60870-5-104 Ethernet Server to Modbus Ethernet Client |
04ES-MBSM | IEC 60870-5-104 Ethernet Server to Modbus Serial Master |
50ES-01SM | IEC 61850 Ethernet Server to IEC 60870-5-101 Serial Master |
50ES-03SM | IEC 61850 Ethernet Server to IEC 60870-5-103 Serial Master |
50ES-04EC | IEC 61850 Ethernet Server to IEC 60870-5-104 Ethernet Client |
50ES-DNEC | IEC 61850 Ethernet Server to DNP3 Ethernet Client |
50ES-DNSM | IEC 61850 Ethernet Server to DNP3 Serial Master |
50ES-MBEC | IEC 61850 Ethernet Server to Modbus Ethernet Client |
50ES-MBSM | IEC 61850 Ethernet Server to Modbus Serial Master |
DNES-01SM | DNP3 Ethernet Server to IEC 60870-5-101 Serial Master |
DNES-03SM | DNP3 Ethernet Server to IEC 60870-5-103 Serial Master |
DNES-04EC | DNP3 Ethernet Server to IEC 60870-5-104 Ethernet Client |
DNES-50EC | DNP3 Ethernet Server to IEC 61850 Ethernet Client |
DNES-DNSM | DNP3 Ethernet Server to DNP3 Serial Master |
DNES-MBEC | DNP3 Ethernet Server to Modbus Ethernet Client |
DNES-MBSM | DNP3 Ethernet Server to Modbus Serial Master |
DNSS-01SM | DNP3 Serial Slave to IEC 60870-5-101 Serial Master |
DNSS-03SM | DNP3 Serial Slave to IEC 60870-5-103 Serial Master |
DNSS-04EC | DNP3 Serial Slave to IEC 60870-5-104 Ethernet Client |
DNSS-50EC | DNP3 Serial Slave to IEC 61850 Ethernet Client |
DNSS-DNEC | DNP3 Serial Slave to DNP3 Ethernet Client |
DNSS-MBEC | DNP3 Serial Slave to Modbus Ethernet Client |
DNSS-MBSM | DNP3 Serial Slave to Modbus Serial Master |
MBES-01SM | Modbus Ethernet Server to IEC 60870-5-101 Serial Master |
MBES-03SM | Modbus Ethernet Server to IEC 60870-5-103 Serial Master |
MBES-04EC | Modbus Ethernet Server to IEC 60870-5-104 Ethernet Client |
MBES-50EC | Modbus Ethernet Server to IEC 61850 Ethernet Client |
MBES-DNEC | Modbus Ethernet Server to DNP3 Ethernet Client |
MBES-DNSM | Modbus Ethernet Server to DNP3 Serial Master |
MBSS-01SM | Modbus Serial Slave to IEC 60870-5-101 Serial Master |
MBSS-03SM | Modbus Serial Slave to IEC 60870-5-103 Serial Master |
MBSS-04EC | Modbus Serial Slave to IEC 60870-5-104 Ethernet Client |
MBSS-50EC | Modbus Serial Slave to IEC 61850 Client |
MBSS-DNEC | Modbus Serial Slave to DNP3 Ethernet Client |
MBSS-DNSM | Modbus Serial Slave to DNP3 Serial MasterMBSS-MBEC |
FL* | Allows a model to run single or multiple protocol(s) in both front-end to SCADA and back-end to IED sides |
*Coming soon |
Optional Accessories | ||
---|---|---|
SDR-75-24 | 50500752240001G | 75W/3.2A DIN-Rail 24VDC power supply with 88~264VAC / 124~370VDC input |
GDC-120 | 59906861G | 120mm copper woven grounding cable |
ADP-DB9(F)-TB5 | 59906231G | Female DB9 to Female 3.81 TB5 Converter |
AXFD-1314-0523 | 522AXFD1314001G | SFP Transceiver;155Mbps, Multi-mode;1310nm;2km;-40~85, DDMI |
AXFD-1314-0553 | 522AXFD1314011G | SFP Transceiver;155Mbps, Single-mode;1310nm;30km;-40~85, DDMI |
HARDWARE | |
---|---|
PG5916A-6SFP | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) SFP slot, DB9, 24-48 VDC |
PG5916A-6SFP-TB | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) SFP slot, TB5, 24-48 VDC |
PG5916A-6SFP-Sis | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) SFP slot, Isolation, 24-48 VDC |
PG5916A-6SFP-HV | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) SFP, DB9, 100-240VAC/100-370VDC |
PG5916A-6SFP-TB-HV | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) SFP slot, TB5, 100-240VAC/100-370VDC |
PG5916A-6SFP-Sis-HV | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) SFP, Isolated, 100-240VAC/100-370VDC |
PG5916A | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) RJ45, DB9, 24-48 VDC |
PG5916A-TB | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) RJ45, TB5, 24-48 VDC |
PG5916A-Sis | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) RJ45, Isolation, 24-48 VDC |
PG5916A-HV | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) RJ45, DB9, 100-240VAC/ 100-370VDC |
PG 5916A-TB-HV | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) RJ45, TB5, 100-240VAC/ 100-370VDC |
PG 5916A-Sis-HV | Ind. 16 Port Protocol Gateway, 10/100BASE-T(X) RJ45, Isolated,100-240VAC/100-370VDC |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.4 | PG5916A Hardware Installation Guide | 2024-01-30 | 3.37 MB | |
v1.3 | SE5916A/MB5916A/PG5916A Hardware Installation Guide | 2017-01-23 | 4.39 MB |