Compact 1-Port Semi-Industrial Serial Device Server, Field-Mount
Despite Ethernet having become the new backbone standard of Industrial Automation, Serial devices still remain highly relevant today, with numerous devices installed on sites worldwide. So with ATOP’s SE5201C Series, you can transform any serial device into an Ethernet-capable one, allowing you to control and monitor your legacy serial devices via your LAN or WAN – or even over the internet.
With such connectivity, the amount of time required to configure or troubleshoot a serial device located on a factory floor or in a remote location is eliminated. And with such Ethernet-based connectivity, serial devices can be integrated into modern practices such as Industry 4.0 and IIoT, allowing you to extend their lifetime and avoid wholesale device upgrades in the near future.
Featuring 1 x software-selectable Serial Port and 1 x RJ45 Port, the SE5201C Series is a simple-to-install device, with easy configurations options such as Telnet, Web browser, or other Windows utilities. And using the VirtualCOM software, Windows-based applications can access serial devices by mapping the virtual com ports to the SE5201C serial server series.
Encased in a rugged metal housing offering semi-industrial EMC protection, the SE5201C Series is ideal for semi-industrial environments where reliability is a must, such as Warehouses, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.
| Environmental Limits | |
|---|---|
| Operating Temperature | -40°C ~ 70°C (-40°F ~ 158°F) |
| Storage Temperature | -40°C~85°C (-40°F~185°F) |
| Ambient Relative Humidity | 5%~95%, (Non-condensing) |
| Physical Characteristics | Value |
|---|---|
| Dimension (W x H x D) | 65mm x 78mm x 28mm (without wall-mount part) SE5201C-TB: 88.5 x 78.3 x 27.8mm (with wall-mount part) SE5201C-DB: 88.5 x 84 x 27.8mm (with wall-mount part and DB9 connector) |
| Weight | 185g |
| Installation | Wall mount, DIN-Rail (optional) |
| Reset Button | Yes |
| Power | Value |
|---|---|
| Input Voltage | DC Jack, 5 VDC |
| Power Consumption | <2W |
| Power Redundancy | No |
| Connector | DC Jack, 5 VDC |
| Reverse Polarity Protection | Yes |
| Serial Interface | |
|---|---|
| Connector | 9-Pin D-Sub9 connector(Male, -DB version) or 5-Pin Terminal block (-TB version) |
| Mode | RS-232/RS-485(2 and 4 wire)/RS-422, software selectable |
| Ports | 1 |
| Baud Rate | 1200~230,400 bps |
| Parity | None, Odd, Even, Space, Mark |
| Data Bits | 7, 8 |
| Stop Bits | 1, 2 |
| Flow Control | None, Xon/Xoff, RTS/CTS (RS-232 only) |
| Network Interface | |
|---|---|
| Speed | IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X) |
| Auto-negotiation | Present |
| Auto MDI/MDI-X | Present |
| Connector ports | RJ45 x 1 |
| Certification | Standard |
|---|---|
| Shock | MIL-STD-810F Method 516.5 |
| Drop | MIL-STD-810F Method 516.5 |
| Vibration | MIL-STD-810F Method 514.5 C-1 & C-2 |
| Warranty | 5 Years |
| MTBF | 54.58 years according to MIL-HDBK-217F, 25 degrees C |
| Protection | IEC/EN60529 - IP30 |
| Standard | Item | Test point | Value | Level |
|---|---|---|---|---|
| IEC 61000-4-2 | Electrostatic Discharge | Contact Discharge | ±4kV | 2 |
| IEC 61000-4-2 | Electrostatic Discharge | Air Discharge | ±8kV | 3 |
| IEC 61000-4-3 | Radiated Susceptibility | 80-1000MHz | 3(V/m) | 2 |
| IEC 61000-4-4 | EFT | AC Power Port | ±1.0kV | 2 |
| IEC 61000-4-4 | EFT | Signal Port | ±0.5kV | 2 |
| IEC 61000-4-5 | Surge | AC Power Port | Line-to Line±1.0kV | 3 |
| IEC 61000-4-5 | Surge | AC Power Port | Line-to Earth±2.0kV | 3 |
| IEC 61000-4-5 | Surge | Signal Port | Line-to Earth±1.0kV | 2 |
| IEC 61000-4-6 | Conducted Susceptibility | 0.15-80MHz | 3 Vrms | 2 |
| IEC 61000-4-8 | PFMF | Enclosure | 1A/m | 2 |
| IEC 61000-4-11 | DIP | AC Power Port | 1. >95%,Reduction,0.5period 2. 30%, Reduction,25 period 3. >95%,Reduction,250 period | - |
| Certification | Standard |
|---|---|
| Safety | EN62368-1 |
| EMC | FCC Part 15, Subpart B, Class A EN 55032, EN 61000-3-2, EN 61000-3-3, EN 55024 |
| RoHS 2 | Yes |
| REACH | Yes |
| MODEL NAME | PART NUMBER | DESCRIPTION |
|---|---|---|
| UV305-0510(US-DC) | 50500051500003G | DC jack (3.5/1.35/7.5 mm) power adapter, 100~240VAC input, 1.0A @ 5 VDC output, US plug, LV6 |
| UVE305-0510 (EU-DC) | 50500051500013G | DC jack (3.5/1.35/7.5 mm) power adapter, 100~240VAC input, 1.0A @ 5 VDC output, EU plug, LV6 |
| UVE305-0510(UK-DC) | 50500051500023G | DC jack (3.5/1.35/7.5 mm) power adapter, 100~240VAC input, 1.0A @ 5 VDC output, UK plug, LV6 |
| ADP-DB9(F)-TB5 | 59906231G | Female DB9 to Female 3.81mm TB5 Converter |
| ADP-DB9(M)-DB9(F) | 59901411G | SE_MB52XX DB9 Pin assignment to SE_MB50XX DB9 Pin assignment |
| DK-25 | 30200000000022G | Plastic DIN Rail Kit |
| MODEL NAME | PART NUMBER | DESCRIPTION |
|---|---|---|
| SE5201C-DB | 1P1SE5201C0001G | Semi-Industrial Serial Device Server, 10/100BASE-T(X), RS232/422/485 DB9 |
| SE5201C-TB | 1P1SE5201C0002G | Semi-Industrial Serial Device Server, 10/100BASE-T(X), RS232/422/485 TB5 |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| v1.0 | Linux_Driver_x64 | 2021-04-06 | 210.16 KB | |
| v5.60 | Management Utility for Windows | 2021-01-18 | 23.65 MB | |
| v5.20 | Management Utility for Windows | 2016-10-28 | 16.21 MB | |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| v1.4 | SE52XX User Manual | 2021-03-19 | 1.96 MB | |
| v1.1 | SE52XX User Manual | 2019-06-03 | 2.51 MB | |
| v1.2 | SE52XX User Manual | 2019-08-22 | 2.65 MB | |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| v1.1 | SE5201-SE5201C Series Hardware Installation Guide | 2019-01-14 | 7.16 MB |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| SE5201C Declarations of Conformity | 2023-03-09 | 292.46 KB | ||
| v1.0 | SE5201C Certification CE_FCC | 2019-11-20 | 3.6 MB | |
| v1.0 | SE5201C Certification LVD | 2019-11-20 | 2.4 MB |
