Make Serial Devices Ready to the Network
The Industrial Serial Device Server is a gateway between Ethernet (TCP/IP) and serial signal communications; allowing almost any serial device to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, the Serial Device Server offers full-duplex and bi-directional data seamlessly between the serial ports and the Ethernet network.
Easy to Use
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web browser, Serial Console, or our Windows utilities. Packed in a rugged metal housing with 19-inch rack mount and 100~240VAC or 24-48VDC power input range. The LAN port 1 and LAN port 2 can be assigned to different subnets. This feature gives the user flexible network manageability. Alternatively, the LAN port 1 and LAN port 2 can be assigned to the same IP network. It will enable the network to recover rapidly from failure and fault, so that the failures and faults will be bypassed.
Specially Designed for Automation Fields
In industrial and manufacturing automation fields, The Serial Device Server is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.
Network Interface | |
---|---|
Speed | IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X) |
LAN Mode | Dual Subnets or Network Redundancy |
Connector ports | 2x 10/100BASE-T(X) RJ-45 |
Serial Interface | |
---|---|
Connector | RJ45 RS-232/422/485 software selectable. For the different modes supported in each model, refer to the ordering information. |
Ports | 8 |
Baud Rate | 50 ~ 921,600 bps software selectable |
Data Bits | 5, 6, 7, 8 software selectable |
Stop Bits | 1, 2 software selectable |
Parity | None, Odd, Even, Space, Mark |
Flow Control | None, Xon/Xoff, RTS/CTS |
Isolation | 2.5 kV (-A version only have isolation, please refer to ordering) |
Software | |
---|---|
Protocols | IPv4, ICMP, TCP, UDP, DHCP Client, SNMP, HTTP, Telnet, RFC2217, NTP, DNS, SMTP, Syslog |
Configuration | Atop Management Utility, Web UI, Telnet, Serial Console |
VirtualCOM | Windows/Linux redirection software |
Link Modes - TCP Client | Single destination or VirtualCOM |
Link Modes - TCP Server | 4 Connections; VirtualCOM or reverse Telnet |
Link Modes - UDP | Up to 4 Ranges IP |
Power | Value |
---|---|
Input Voltage | DC version: 24 - 48VDC; US-EU version: 100~240 VAC (EU or US Plug) |
Input Current | DC version: 0.54 A @24VDC; US-EU version: 0.21A@100VAC |
Power Consumption | Approximately 21 W (Max) |
Connector | DC version: 5.08mm 3-pin Lockable Terminal Block EU-US version: IEC 60320-1 C14 AC Power Inlet |
Power Redundancy | No |
Reverse Polarity Protection | Yes (DC version only) |
Relay Output | Yes (1) |
Physical Characteristics | Value |
---|---|
Housing | IP30 SPCC housing |
Dimension (W x H x D) | 436 mm x 43.5 mm x 200 mm |
Weight | 3,000g (8-port version); 3,200 g (16-port version) |
Installation | 19’’ Rack-Mount (Kit included) |
Reset Button | Yes |
Environmental Limits | |
---|---|
Operating Temperature | -20°C~70°C (-4°F~158°F) |
Storage Temperature | -40°C~85°C (-40°F~185°F) |
Ambient Relative Humidity | 5%~95%, 55°C (Non-condensing) |
Certification | Standard |
---|---|
Safety | EN 60950-1 |
EMC | EN 55022: 2010, EN 55024: 2010, FCC Part 15B, Class A |
RoHS 2 | Yes |
REACH | Yes |
Standard | Item | Test | Value | Level | Criteria |
---|---|---|---|---|---|
IEC 61000-4-2 | ESD | Contact Discharge | ±8kV | 4 | B |
IEC 61000-4-2 | ESD | Air Discharge | ±15kV | 4 | B |
IEC 61000-4-3 | RS | Radiated (enclosure) | 10 V/m | 3 | A |
IEC 61000-4-4 | EFT | Signal Port | ±2.0KV | 4 | B |
IEC 61000-4-4 | EFT | DC Power Port | ±2.0kV | 3 | B |
IEC 61000-4-4 | EFT | AC Power Port | ±4.0kV | 4 | B |
IEC 61000-4-5 | Surge | AC Power Port (L-2-L) | ±2.0KV | 4 | A |
IEC 61000-4-5 | Surge | AC Power Port (L-2-E) | ±4.0KV | 4 | A |
IEC 61000-4-5 | Surge | DC Power Port (L-2-L) | ±1.0KV | 2 | A |
IEC 61000-4-5 | Surge | DC Power Port (L-2-E) | ±1.0KV | 2 | A |
IEC 61000-4-5 | Surge | Signal Port (L-2-E) | ±2.0KV | 3 | B |
IEC 61000-4-6 | CS | AC Power Port | 10 V rms | 3 | A |
IEC 61000-4-6 | CS | DC Power Port | 10 V rms | 3 | A |
IEC 61000-4-6 | CS | Signal Port | 10 V rms | 3 | A |
IEC 61000-4-8 | PFMF | Enclosure ports | 1 A/m continuous | 3 | A |
IEC 61000-4-11 | DIP | AC Power Port | Dips: >95% dip, 30% reduction | - |
Certification | Standard |
---|---|
Shock | IEC 60068-2-27 |
Drop | IEC 60068-2-32 |
Vibration | IEC 60068-2-64 |
Warranty | 5 Years |
MTBF | TBD |
MODEL NAME | PART NUMBER | DESCRIPTION | ETHERNET PORTS | SERIAL PORTS |
---|---|---|---|---|
SE5408A | 1P1SE5408A0001G | 8-Port Industrial Serial Device Server, RS-232, AC Inlet, US Plug | 2 (RJ45) | 8 (RJ45) |
SE5408A-DC | 1P1SE5408A0002G | 8-Port Industrial Serial Device Server, RS-232, DC TB3 | 2 (RJ45) | 8 (RJ45) |
SE5408A-S5 | 1P1SE5408A0003G | 8-Port Industrial Serial Device Server, RS-422/485, AC Inlet, US Plug | 2 (RJ45) | 8 (RJ45) |
SE5408A-S5-DC | 1P1SE5408A0004G | 8-Port Industrial Serial Device Server, RS-422/485, DC TB3 | 2 (RJ45) | 8 (RJ45) |
SE5408A-EU | 1P1SE5408A0011G | 8-Port Industrial Serial Device Server, RS-232, AC Inlet, EU Plug | 2 (RJ45) | 8 (RJ45) |
SE5408A-S5-EU | 1P1SE5408A0013G | 8-Port Industrial Serial Device Server, RS-422/485, AC Inlet, EU Plug | 2 (RJ45) | 8 (RJ45) |
MODEL NAME | PART NUMBER | DESCRIPTION |
---|---|---|
SDR-75-24 | 50500752240001G | 75W/3.2A DIN-Rail 24VDC power supply with 88~264VAC / 124~370VDC input |
AD17-24C (US-Y) | 50500151240002G | Y-Type power adaptor,100-240VAC input, 0.6A @ 24VDC output, US plug |
AD17-24D (EU-Y) | 50500151240012G | Y-Type power adaptor,100-240VAC input, 0.6A @ 24VDC output, EU plug |
GDC-120 | 59906861G | 120mm copper woven grounding cable |
CBL-RJ45(8P)-DB9(M)-90 | 50891781G | RJ45 to DB9 Male Cable, 90cm |
CBL-RJ45(8P)-DB9(M)-200 | 50891951G | RJ45 to DB9 Male Cable, 200cm |
CBL-RJ45(8P)-DB9(F)-90 | 50891791G | RJ45 to DB9 Female Cable, 90cm |
CBL-RJ45(8P)-DB9(F)-90-C | 50891971G | RJ45 to DB9 Female Cross Over Cable, 90cm |
CBL-RJ45(8)-DB9(F)-200-C | 50891961G | RJ45 to DB9 Female Cross Over Cable, 200cm |
RMK-718-Black | 70100000000040G | Rack Mount Mounting-Kit, Black |
Power Cable (US) | 50801041G | 6 feet Power Cable, US |
Power Cable (EU) | 50801051G | 6 feet Power Cable, EU |
Fuse | 50709441G | Fuse |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v5.20 | Management Utility for Windows | 2017-09-28 | 16.21 MB |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v4.56 | SE54XXA/A2 Firmware | 2020-05-07 | 4.26 MB | |
v4.54 | SE54XXA/A2 Firmware | 2017-04-18 |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v6 | Datasheet EN | 2015-09-14 | 772.18 KB |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.1 | SE54XXA/A2 User Manual | 2017-04-20 | 2.64 MB |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.0 | SE54XXA/A2 Hardware Installation Guide | 2016-02-22 | 239.73 KB |
Version | Name | Time | Size | Download |
---|---|---|---|---|
SE5408A Declarations of Conformity | 2023-03-10 | 457.87 KB |