home

SE5001A Series

1-Port Industrial Serial Device Server, with Industrial EMC Protection supporting RS-232/RS-485/RS-422

  • Industrial EMC protection
  • Rugged metal case with wall or DIN-Rail mount
  • 10/100Mbps Fast Ethernet full duplex auto negotiation
  • TCP Server/Client, UDP, Virtual COM and Tunneling modes supported
  • Remotely monitor, manage, and control industrial field devices
  • Configuration via Web Browser / Serial Console / Telnet Console / Windows Utility
  • Remote firmware upgrade

*** This Series has been replaced by the SE5201 one. In case you need an extending life time support, please contact your local agent.

Discontinued
SE5001A Series
SE5001A Series

Make Serial Devices Ready to the Network
The Industrial Serial Server SE5001A is a cost effective gateway for Ethernet (TCP/IP) and serial signal communications; allowing almost any serial device to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, SE5001A offers full-duplex and bi-directional data seamlessly between the serial port and the Ethernet network.

Easy to Use
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web Browser, Serial Console, or our Windows Utility. Packed in a rugged metal housing for wall or DIN-Rail mount with 9~48VDC wide range power input, SE5001A is ideal for almost any industrial and manufacturing automation process. Atop Virtual COM software provides a virtual environment for applications when accessing SE5001A through TCP.

Specially Designed for Automation Fields
In industrial and manufacturing automation fields, SE5001A is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.

Network Interface
SpeedIEEE 802.3 10BaseT
IEEE 802.3u 100BaseT(X)
Auto MDI/MDI-XPresent
Connector portsRJ45 x 1
Serial Interface
ConnectorD-Sub9 RS-232/422/485 software selectable (DB models)
5.08mm 5-Pin Terminal block RS-232/422/485 software selectable (TB models)
Ports1
Baud Rate1,200bps ~ 230kbps software selectable
Data Bits7, 8 software selectable
Stop Bits1, 2 software selectable
Flow ControlNone, Xon/Xoff, RTS/CTS
Software
ProtocolsIPv4, ICMP, TCP, UDP, DHCP Client, SNMP, HTTP, Telnet, RFC2217
ConfigurationAtop Management Utility, Web UI, Telnet
VirtualCOMWindows/Linux redirection software
Link Modes - TCP ClientSingle destination or VirtualCOM
Link Modes - TCP Server4 Connections; VirtualCOM or reverse Telnet
Link Modes - UDPUp to 4 Ranges IP
PowerValue
Input Voltage9 - 48VDC
Input Current (@ 9VDC)0.30 A @ 9 VDC
Power ConsumptionApproximately 2.70 W (Max)
Connector3-Pin 5.08mm Lockable Terminal Block
Reverse Polarity ProtectionYes
Physical CharacteristicsValue
Dimension (W x H x D)75 mm x 85 mm x 28 mm
Weight200g
InstallationWall mount, DIN-Rail (optional)
Reset ButtonYes
Environmental Limits
Operating Temperature0°C ~ 60°C ( 32º ~ 140ºF )
Storage Temperature-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity5%~95%, 55°C (Non-condensing)
CertificationStandard
SafetyEN 60950-1: 2011 / IEC 60950-1:2009
EMCEN 55022: 2007, EN 55024: 2010, FCC Part 15 Subpart B Class A
RoHS 2Yes
REACHYes
StandardItemTestValueLevel
IEC 61000-4-2ESDContact Discharge±8kV4
IEC 61000-4-2ESDAir Discharge±15kV4
IEC 61000-4-3RSRadiated (enclosure)10 V/m3
IEC 61000-4-4EFTAC Power Port±2.0kV3
IEC 61000-4-4EFTDC Power Port±2.0kV3
IEC 61000-4-4EFTSignal port±2.0kV4
IEC 61000-4-5SurgeAC Power Port (L-2-L)±2.0KV4
IEC 61000-4-5SurgeAC Power Port (L-2-E)±4.0KV4
IEC 61000-4-5SurgeDC Power Port (L-2-L)±0.5KV2
IEC 61000-4-5SurgeDC Power Port (L-2-E)±1.0KV2
IEC 61000-4-5SurgeSignal Port (L-2-E)±2.0KV3
IEC 61000-4-6CSAC Power Port10 V rms3
IEC 61000-4-8PFMFEnclosure10 A/m3
IEC 61000-4-11DIPAC Power Port--
CertificationStandard
ShockIEC 60068-2-27
DropIEC 60068-2-32
VibrationIEC 60068-2-64
Warranty5 Years
MTBFTBD
MODEL NAME PART NUMBERDESCRIPTION
SE5001A1P1SE5001A0001G1-port Industrial Serial Device Server, D-Sub
SE5001A-TB1P1SE5001A0002G1-port Industrial Serial Device Server, Terminal Block　
MODEL NAME PART NUMBERDESCRIPTION
UN315-1212 (US-Y)50500151120003GY-Type power adapter, 100~240VAC input, 1.25A @ 12VDC output, US plug, LV6
UNE315-1212 (EU-Y)50500151120013GY-Type power adapter, 100~240VAC input, 1.25A @ 12VDC output, EU plug, LV6
ADP-DB9(F)-TB559906231GFemale DB9 to Female 3.81mm TB5 Converter
DK-2530200000000022GPlastic DIN Rail Kit

Utility

Version Name Time Size Download
v5.60 Management Utility for Windows 2021-01-18 23.65 MB
More versions
v5.20 Management Utility for Windows 2016-10-28 16.21 MB

Firmware

Version Name Time Size Download
v3.609 SE5001A Firmware 2017-04-21 189.03 KB

Quick Start Guide

Version Name Time Size Download
v1.7 SE5001-SE5001A Quick Start Guide 2017-10-02 208.4 KB

Datasheet

Version Name Time Size Download
v2 Datasheet EN 2017-06-30 2.08 MB

Manual

Version Name Time Size Download
v1.1 SE5001A User Manual 2017-04-27 1.95 MB

Test reports

Version Name Time Size Download
SE5001A Declarations of Conformity 2023-03-10 436.7 KB
Reload
I have read and agree to the Privacy Policy (art.13 and 14 of the GDPR - EU Regulation 2016/679).