Providing connectivity for the Internet of Things
SE5901B, ATOP’s Industrial Serial to Ethernet and Cellular Gateway/Router is a high-performance, cost effective gateway for serial signal communications; allowing almost any serial device to be connected to Ethernet network and providing connectivity to the world and at the same time protecting your network from intrusions. Its powerful CPU provides up to 37.9Mbps* software-assisted AES encryption for protecting your data flow through the Internet with a secure IPsec VPN tunnel.
Advanced features available
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web Browser, or our Windows Utility. ATOP Virtual COM software provides a virtual environment for applications when accessing SE5901B through TCP. A dedicated I/O version provides 2 Digital Inputs and 2 Digital Outputs, GPS version provides Global positioning system geolocation and, specifically for the Internet of Things, a “B” version provides additional 15 seconds power during a power failure, allowing the device to relay back to the host the failure. This is Maintenance 4.0.
Rugged and flexible for advanced developments
SE5901B embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device. SDK versions allow you to make use of the powerful hardware and develop your own applications on top of ATOP’s reliable APIs and with plenty of coding examples in ATOP’s SDK. SDK versions are available upon request. Please contact ATOP’s representative for additional information.
* test carried out with one VPN-IPsec Tunnel, Peer-to-Peer mode, Ethernet cable. Performance can change based on the Cellular Network.
Wireless Interface | ||||
---|---|---|---|---|
Standard | WCDMA/ DC-HSPA+/ LTE | |||
Antennas/ SIM card | 1 (3G) or 2 (4G) - Included. Internal SIM card slot (x1) | |||
Band Options | Version | Standard | Bands | |
EU | FDD LTE | 2100/1800/850/2600/900/800MHz (B1/B3/B5/B7/B8/B20) |
||
TDD LTE | 2600/2300/2500MHz (B38/B40/B41) | |||
WCDMA | 2100/850/900MHz (B1/B5/B8) | |||
US | FDD LTE | 1900/1700/850/700/600bMHz (B2/B4/B5/B12/B13/B14/B66/B71) |
||
WCDMA | 1900/1700/850MHz (B2/B4/B5) | |||
Data Rate | Version | Standard | Downlink Speed | Uplink Speed |
EU | LTE-FDD | 150 Mbps | 50 Mbps |
|
LTE-TDD | 130 Mbps | 30 Mbps | ||
DC-HSPA+ | 42 Mbps | 5.76 Mbps | ||
WCDMA | 384 Kbps | 384 Kbps | ||
US | LTE-FDD | 150 Mbps | 50 Mbps | |
DC-HSPA+ | 42 Mbps | 5.76 Mbps | ||
WCDMA | 384 Kbps | 384 Kbps |
Network Interface | |
---|---|
Speed | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) |
Connector ports | 1x 10/100/1000BASE-TX RJ-45 |
Serial Interface | |
---|---|
Connector | D-Sub9 RS-232/485 software selectable (DB model) 14-Pin 5.08mm Terminal Block (integrated with DI/DOs) |
Ports | 1 port RS-232/485 (2-wire) software selectable 1 port RS-232 (IO model only) |
Baud Rate | 1,200 to 921,600bps software selectable |
Data Bits | 7, 8 software selectable |
Stop Bits | 1, 2 software selectable |
Flow Control | None, Xon/Xoff, RTS/CTS (RS-232 only) |
GNSS Interfaces | |
---|---|
Supported GNSS | GPS, Glonass, Beidou |
Connector | 1x SMA |
Other Interfaces | |
---|---|
USB Ports | 2 |
USB Speed | 1 x USB 2.0 High Speed OTG; 1x USB power only |
USB Connector | USB A Type |
Digital Inputs (DI) | 2 x channels photo coupler isolated digital input |
Digital Outputs (DO) | 2 x digital relay outputs. N.O.( 2A@24VDC) |
Software | |
---|---|
Serial Server-related | VirtualCOM (Serial/IP), Virtual Server (port Forwarding) |
Security | IPsec, PPTP or OpenVPN VPN tunneling. Max VPN throughput 37.9Mbps *; SMTP/TLS, Firewall, DMZ |
Network | ARP, IPv4, DHCP Client, ICMP, TCP, UDP, HTTP, RFC2217,TELNET, NTP Client, NAT, Port Forwarding, ICMP Ping, DDNS |
Management | Web, ATOP Device Management Utility, SNMPv1/v2c/v3, SMS |
Configuration | Embedded Web-Server (Web UI), TELNET, Atop Device Management Utility |
Power | Value |
---|---|
Input Voltage | 9 - 48 VDC |
Connector | 3-Pin 5.08mm Lockable Terminal Block |
Power Consumption | 0.65A@12 VDC (Approx. 7.8W) |
Power Redundancy | USB DC 5V Power Input |
Reverse Polarity Protection | Yes |
Physical Characteristics | Value |
---|---|
Housing | IP30 protection, SPCC metal housing |
Dimension (W x H x D) | 32mm x 122mm x 92mm |
Weight | 400g |
Installation | DIN-Rail , Wall mount (optional kit) |
Reset Button | Yes |
Environmental Limits | |
---|---|
Operating Temperature | -40°C~70°C (-40°F~158°F) |
Storage Temperature | -40°C~85°C (-40°F~185°F) |
Ambient Relative Humidity | 5% to 95% (non-condensing) |
Certification | Standard |
---|---|
Safety | CB (IEC/EN62368-1 & IEC/EN60950-1), UL60950-1 |
EMC/Radio | FCC 47 CFR PART 22H, FCC 47 CFR PART 24H, FCC PART 27L, FCC Part 15B, EN301489-1, EN301489-7, EN301489-19, EN301489-24, EN301489-52, EN301511, EN301908-1, EN303413, ETSI EN300440-1/-2 EN55032,EN55024, EN61000-6-2, EN61000-6-4 |
Standard | Item | Test | Value | Level |
---|---|---|---|---|
IEC 61000-4-2 | ESD | Contact Discharge Air Discharge | ±6KV ±8KV | 3 |
IEC 61000-4-3 | RS | Enclosure Port | 10(V/m), 80-1000MHz | 3 |
IEC 61000-4-4 | EFT | DC Power Port Signal Port | ±2.0KV ±1.0KV | 3 3 |
IEC 61000-4-5 | Surge | DC Power Port DC Power Port Signal Port | Line-to Line±1.0KV Line-to Earth±2.0KV Line-to Earth±2.0KV | 3 3 3 |
IEC 61000-4-6 | CS | 0.15-80MHz | 10V rms | 3 |
IEC 61000-4-8 | PFMF | (Enclosure) | AC 50Hz 30A/m | 3 |
Certification | Standard |
---|---|
Shock | MIL-STD-810G Method 516.7 |
Drop | MIL-STD-810G Method 516.7 |
Vibration | MIL-STD-810G Method 514.7 |
RoHS | Yes |
MTBF | 20.88 years according to MIL-HDBK-217F (Model average) |
Warranty | 5 Years |
MODEL NAME | Part number | CELLULAR | SERIAL PORTS | I/O | OTHER |
---|---|---|---|---|---|
SE5901B-4G-US | 1P1SE5901B4G03G | 4G (US) | 1 (DB9) | - | - |
SE5901B-IO-4G-US | 1P1SE5901BIO04G | 4G (US) | 1 (TB) +1 RS232 | 2/2 | - |
SE5901B-IO-4G-GPS-US | 1P1SE5901BIO06G | 4G (US) | 1 (TB) +1 RS232 | 2/2 | GPS |
SE5901B-4G-B-US | 1P1SE5901B4G04G | 4G (US) | 1 (DB9) | - | Battery |
SE5901B-IO-4G-B-US | 1P1SE5901BIO05G | 4G (US) | 1 (TB) +1 RS232 | 2/2 | Battery |
SE5901B-IO-4G-GPS-B-US | 1P1SE5901BIO07G | 4G (US) | 1 (TB) +1 RS232 | 2/2 | GPS - Battery |
SE5901B-4G-EU | 1P1SE5901B4G13G | 4G (EU) | 1 (DB9) | - | - |
SE5901B-IO-4G-EU | 1P1SE5901BIO14G | 4G (EU) | 1 (TB) +1 RS232 | 2/2 | - |
SE5901B-IO-4G-GPS-EU | 1P1SE5901BIO16G | 4G (EU) | 1 (TB) +1 RS232 | 2/2 | GPS |
SE5901B-4G-B-EU | 1P1SE5901B4G14G | 4G (EU) | 1 (DB9) | - | Battery |
SE5901B-IO-4G-B-EU | 1P1SE5901BIO15G | 4G (EU) | 1 (TB) +1 RS232 | 2/2 | Battery |
SE5901B-IO-4G-GPS-B-EU | 1P1SE5901BIO17G | 4G (EU) | 1 (TB) +1 RS232 | 2/2 | GPS - Battery |
SE5901B-IO-4G-GPS-B-US (for Marine) | 1P1SE5901BIO0TG | 4G (US) | 1 (TB) +1 RS232 | 2/2 | GPS - Battery |
SE5901B-4G-B-US (for Marine) | 1P1SE5901B4G0CG | 4G (US) | 1 (DB9) | - | Battery |
MODEL NAME | PART NUMBER | DESCRIPTION |
---|---|---|
UN315-1212(US-Y) LV6 | 50500151120003G | Y-Type (5.08 mm) adaptor, 100-240VAC input, 1.25A @ 12VDC output, US plug |
UNE315-1212(EU-Y)LV6 | 50500151120013G | Y-Type (5.08 mm) adaptor, 100-240VAC input, 1.25A @ 12VDC output, EU plug |
ADP-DB9(F)-TB5 | 59906231G | Female DB9 to Female 3.81mm TB5 Converter |
WMK-315-Black | 70100000000050G | Black Aluminum Wall Mount Kit |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.0 | Linux_Driver_x64 | 2021-03-29 | 210.16 KB | |
v5.60 | Management Utility for Windows | 2021-01-18 | 23.65 MB | |
v5.20 | Management Utility for Windows | 2016-10-28 | 16.21 MB |
Version | Name | Time | Size | Download |
---|---|---|---|---|
v1.0 | SE5901B/MB5901B/PG5901B Hardware Installation Guide | 2017-06-09 | 5.91 MB |