Industrial IoT Remote I/O
As an IIoT I/O module, ATOP’s IO5202 Series is a compact solution for connecting digital and analog devices and sensors, enabling you to monitor, acquire and process data from remote sensors and control digital and analog outputs. The IO5202 Series is a cost-effective solution for integrating existing applications into an IIoT framework, such as automated manufacturing, building management and control, and agricultural and irrigation systems.
Offering plug-and-play simplicity, the IO5202 Series supports numerous protocols, including Modbus TCP/RTU/ASCII, MQTT, MQTT over TLS and SNMP. Using the intelligent processing and publishing features of the IO5202 Series, data can be polled, logged, or even automatically pushed when I/O statuses change.
Supporting numerous configurations options to support various types of digital I/O, analog I/O, and relay scenarios, the IO5202 Series has been designed for demanding industrial applications that require compact solutions while delivering high network performance. Supporting a wide operating temperature range of -40ºC~70ºC* and Industrial EMC protection, the IO5202 Series can perform under a variety of environmental conditions, such as power input voltage, shock, drop and vibration.
APPLICATION
The IO5202 Series supports Modbus TCP/RTU/ASCII, MQTT, MQTT over TLS and SNMP. Using the intelligent processing and publishing features, data can be polled, logged, or even automatically pushed when I/O statuses change. Also, data can be pushed to connect and interact with a public or private cloud servers.
| ANALOG OUTPUTS | VALUE |
|---|---|
| Output Type | Voltage/Current Software Selectable |
| Voltage Range | Voltage: ±10 VDC |
| Current Range | Current: 4 to 20 mA |
| Resolution | 16 bits |
| Accuracy | ±0.1% FSR @ 25 ºC |
| Load Resistor | Internal resistor, 500Ω |
| ANALOG INPUTS | VALUE |
|---|---|
| Current contact rating | Voltage/Current Software Selectable |
| Input Range | Voltage: ±60m VDC, ±500m VDC, ±1 VDC, ±5 VDC, ±10 VDC |
| Current Range | Current: 4 to 20 mA |
| Resolution | 16 bits |
| Accuracy | ±0.1% FSR (Voltage) @25ºC ±0.2% FSR (Current) @25ºC |
| Sampling Rate | > 10 samples/sec (per channel) |
| Isolation | 3k VDC or 2k Vrms |
| RELAY OUTPUTS | VALUE |
|---|---|
| Form | Form A power relay |
| Isolation resistance | 1G Ω @500VDC |
| Isolation between contacts | 3K Vrms |
| DIGITAL OUTPUTS | VALUE |
|---|---|
| Output Type | Output or Pulse output |
| Nominal Voltage | 30 VDC |
| Current Rating | max 500 mA totally |
| Over-voltage Protection | 45 VDC |
| Over-current Protection | 2.6A |
| Over-temperature shutdown | 175ºC |
| Isolation | 3K Vrms |
| DIGITAL INPUTS | VALUE |
|---|---|
| Input Type | Single status (wet or dry contact) or counter |
| Dry contact | Logic 1: short to GND, Logic 0: open |
| Wet contact | Logic 1: 0 to 3 VDC, Logic 0: 10 to 30 VDC |
| Counter Frequency | 250 Hz |
| Isolation | 3K Vrms |
| ENVIRONMENTAL LIMITS | VALUE |
|---|---|
| Operating Temperature | -40~+70ºC (-40~+158ºF) |
| Storage Temperature | -40~+85ºC (-40~+185ºF) |
| Ambient Relative Humidity | 5~+95% RH (non-condensing) |
| PHYSICAL CHARACTERISTICS | VALUE |
|---|---|
| Housing | IP30 protection according to EN 60529 |
| Material | SPCC |
| Dimension (W x H x D) | 45.3 x 89.6 x 110 mm |
| Weight | 350g |
| Installation | DIN-rail or wall-mount (optional) |
| SOFTWARE FEATURES | VALUE |
|---|---|
| Protocols | TCP, IPv4, UDP, DHCP Client/Server, HTTP, HTTPS, NTP client, Telnet, ARP, SNMPv1,v2c,v3, serial console(on-board connector), MQTT, MQTT Security over TLS, SMTP/ SMTP with TLS |
| LED | VALUE |
|---|---|
| Indicators | PWR, RUN, RJ45 Act/Link, COM1 Tx, COM1 Rx |
| POWER | VALUE |
|---|---|
| Input Voltage | 12-48VDC |
| Input Current | 0.6~0.2A |
| Max. Power Consumption | 9.6W |
| Reverse polarity protection | Present |
| Connector | 5.08mm 3-Pin Lockable Terminal Block |
| SERIAL | VALUE |
|---|---|
| Mode | RS-232/ RS-422 / RS-485 (2-wire and 4-wire) |
| Number of ports | 1x |
| Connector | 5-pin 3.81mm Terminal Block (-TB models) or 9-pin D-Sub9 (-DB models) |
| Baud rate | 1200~234,000 bps |
| Data bits | 7,8 software selectable |
| Stop bits | 1,2 software selectable |
| Auto-detection | RS-485 auto-detection by hardware |
| ETHERNET | STANDARD |
|---|---|
| Compliance | IEEE802.3 for 10BASE-T IEEE802.3u for 100BASE-T(X) |
| Number of ports | 2x RJ45 |
| Transmission Rate | 10/100 Mbps |
| Auto MDI/MDI-X | Yes |
| CERTIFICATION | STANDARD |
|---|---|
| Shock | MIL-STD-810F Method 516.5 |
| Drop | MIL-STD-810F Method 516.5 |
| Vibration | MIL-STD-810F Method 514.5 C-1 & C-2 |
| RoHS | Yes |
| MTBF | 22.66 Years |
| Warranty | 5 Years |
| STANDARD | VERSION | ITEM | TEST POINT | VALUE | LEVEL |
|---|---|---|---|---|---|
| IEC 61000-4-2 | 2009 | ESD | Contact Discharge Air Discharge | ±4KV ±8KV | 2 3 |
| IEC 61000-4-3 | 2010 | RS | 80-1000MHz 1.4-6.0GHz | 10(V/m) 3(V/m) | 3 2 |
| IEC 61000-4-4 | 2012 | EFT | DC Power Port Signal Port | ±2.0KV ±1.0KV | 3 3 |
| IEC 61000-4-5 | 2017 | Surge | DC Power Port DC Power Port Signal Port | Line-to Line± 0.5 KV Line-to Earth± 1 KV Line-to Earth± 1 KV | 2 2 2 |
| IEC 61000-4-6 | 2013 | CS | DC Power Port | 10 V rms | 3 |
| IEC 61000-4-8 | 2009 | PFMF | Enclosure | 30A/m | 4 |
| CERTIFICATION | STANDARD |
|---|---|
| Safety | EN62368-1 |
| EMC | EN55032:2015+AC:2016, EN61000-6-4:2007+A1:2011, EN55024:2010+A1:2015, EN 55035:2017 EN61000-6-2:2005+AC:2005, EN301489-1 v2.1.1/ EN301489-17 v3.1.1 FCC Part 15B FCC Part 18 |
| MODEL NAME | PART NUMBER | DESCRIPTION |
|---|---|---|
| SDR-75-24 | 50500752240001G | 75W DIN-Rail 24VDC pwr supply, 88~264VAC / 124~370VDC input |
| UN315-1212(US-Y) LV6 | 50500151120003G | Y-Type (5.08 mm) power adaptor, 100-240VAC input, 1.25A @ 12VDC output, US plug, LV6. |
| UNE315-1212(EU-Y)LV6 | 50500151120013G | Y-Type (5.08 mm) adaptor, 100-240VAC input, 1.25A @ 12VDC output, EU plug |
| ADP-DB9(F)-TB5 | 59906231G | Female DB9 to Female 3.81mm TB5 Converter |
| WMK-454-Black | 70100000000043G | Black Aluminum Wall Mount Kit |
| MODEL NAME | PART NUMBER | DESCRIPTION |
|---|---|---|
| IO5202-DB-16-0-0-0 | 1P1IO520200001G | 1x RS232/422/485 DB9, 2x 10/100 Mbps, 8 DOs, 8 DIs |
| IO5202-TB-16-0-0-0 | 1P1IO520200002G | 1x RS232/422/485 TB5, 2x 10/100 Mbps, 8 DOs, 8 DIs |
| IO5202-DB-0-0-8-0 | 1P1IO520200003G | 1x RS232/422/485 DB9, 2x 10/100 Mbps, 8 AIs |
| IO5202-TB-0-0-8-0 | 1P1IO520200004G | 1x RS232/422/485 TB5, 2x 10/100 Mbps, 8 AIs |
| IO5202-DB-6-2-4-0 | 1P1IO520200005G | 1x RS232/422/485 DB9, 2x 10/100 Mbps, 6 DIs, 4 AIs, 2 Rlys |
| IO5202-TB-6-2-4-0 | 1P1IO520200006G | 1x RS232/422/485 TB5, 2x 10/100 Mbps, 6 DIs, 4 AIs, 2 Rlys |
| IO5202-DB-8-4-0-0 | 1P1IO520200007G | 1x RS232/422/485 DB9, 2x 10/100 Mbps, 8 DIO, 4 Rlys |
| IO5202-TB-8-4-0-0 | 1P1IO520200008G | 1x RS232/422/485 TB5, 2x 10/100 Mbps, 8 DIO, 4 Rlys |
| IO5202-DB-0-0-4-4 | 1P1IO520200009G | 1x RS232/422/485 DB9, 2x 10/100 Mbps, 4 AIs, 4 AOs |
| IO5202-TB-0-0-4-4 | 1P1IO52020000AG | 1x RS232/422/485 TB5, 2x 10/100 Mbps, 4 AIs, 4 AOs |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| v5.60 | Management Utility | 2021-01-18 | 23.65 MB |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| v1.31 | IO5202 Firmware | 2024-08-12 | 12.09 MB | |
| v1.27 | IO5202 Firmware | 2023-01-30 | 11.54 MB | |
| v1.25 | IO5202 Firmware | 2021-01-08 | 12 MB | |
| v1.19 | IO5202 Firmware | 2020-06-15 | 12 MB | |
| Version | Name | Time | Size | Download |
|---|---|---|---|---|
| v1.1 | IO5202 Hardware Installation Guide | 2021-10-29 | 651.58 KB | |
| v1.0 | IO5202 Hardware Installation Guide | 2020-06-11 | 3.43 MB | |
